Fastlec uses cookies to ensure that we give you the best experience on our website. If you continue we assume that you consent to receive all cookies on the Fastlec website. Read More.
Blog
All of the latest news and insights into the electrical world, from Fastlec.
The Airflow iCON 15 fan is most suited to toilets and small bath/shower rooms. We recommend the iCON30 as a better choice for bathrooms and shower rooms as it clears any humidity quicker than its direct competitors.  Finished in White as standard, but available in a range of optional, coloured, front covers to suit the decor in your room. To help you to get the best out of your iCON15 fan a range of additional plug-in modules are available to add including a pullcord, timer, humidity and PIR occupancy sensor control. The fan will also work perfectly using a simple on/off mode without the addition of any modules if you prefer. The fan can be either wired to come on with your room light or a separate remote switch. The most popular feature on the iCON range is the futuristic, gradually opening iris shutter. This extremely neat feature prevents back drafts coming back into your room when the fan is not in use. There is a short delay before the shutter opens once the fan has started up, this is normal.
 Airflow iCON 15  Control Modules:  Which module should I use? - Mains voltage modules only from the choice below:  Humidity (HTM) â?? This module monitors the humidity in your bathroom and switches the fan on and off as required to control it. Also incorporates an overrun timer which allows the fan to run on for a while after the room light is switched off. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting. Both the humidity level and the timer can be easily adjusted to suit your needs. Timer (TM) â?? This module provides an overrun timer which allows the fan to run on for a while after the room light is switched off. Pullcord (PCM) â?? The pullcord module allows local manual switching of the fan. PIR/Timer (PRTM) â?? The PIR/Timer module switches the fan on when someone walks into the room. When they leave the room, the fan runs on for a preset length of time dictated by the user set timer. This module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting. PIR/Humidity/Timer (PRHTM) â?? This module is the same as the PRTM module but with additional humidity control (As you could easily leave the room when its full of steam). Continuous Ventilation 2 Speed (TPM15) â?? This allows the Airflow iCON 15 fan to run continuously at a low speed with the option to boost to high speed when the room is in use.Â
- Ductable up to 4M.
- Wall/ceiling/panel mounting.
- Performance 21 litres per second which is 76 metres cubed per hour.Â
- Fan size 197x40mm.
- Duct Size 100mm.
- Supply 230V.
- IPX4 Splashproof.
-Sound pressure 35dB(A) at 3M.
 Easy Installation - A quick, core drilled hole enables immediate fixing of the fan. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces.
