The Airflow iCON 15 fan is most suited to toilets and small bath/shower rooms.
We recommend the iCON30 as a better choice for bathrooms and shower rooms as it clears any humidity quicker.
Colour: The standard fan comes with a white cover, but you can choose from a range of colours in order to compliment your room decor.
Auto-iris: The smooth opening front shutter design has been a massive winner for Airflow. Its futuristic and sleek, our clients love it. It effectively stops drafts from getting back into your room.
Modules: Various timer, humidity, sensor, dmev and delay start control options can be added by purchasing an additional module that plugs into your iCON15. Alternatively the fan will work on its own, as it comes, without a module in a straight on/off operation method (using any remote switch or lighting circuit). The iCON15 fan only takes mains voltage (230V) modules.
Airflow iCON 15 Optional Control Modules:
Module choice:
Humidity (HTM) - Monitors the humidity in your bathroom and switches the fan on and off as required to control it. Also incorporates an overrun timer which allows the fan to run on for a while after the room light is switched off. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting. Both the humidity level and the timer can be easily adjusted to suit your needs.
Timer (TM) - An overrun timer which allows the fan to run on for a while after the room light is switched off.
Pullcord (PCM) - Allows local manual switching of the fan.
PIR/Timer (PRTM) - Switches the fan on when someone walks into the room. When they leave the room, the fan runs on for the duration of the timer setting. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting.
PIR/Humidity/Timer (PRHTM) - Same as the PRTM module but with additional humidity control (As you could easily leave the room when its full of steam).
Continuous Ventilation 2 Speed (CV2) - Allows the fan to run continuously at a low speed with the option to boost to high speed when the room is in use.
Delay Start (DTM) - Delays fan start by 2 minutes and includes an over-run timer.
- Can be ducted up to 4 metres (bends and accessories reduce this length).
- Can be Wall, ceiling or panel mounted.
- Performance 21 litres per second which is 76 metres cubed per hour.
- Overall Fan size 197x40mm.
- Required Ducting Size 100mm.
- Works Straight Off The Mains Supply 230V.
- IPX4 Splashproof For Use In Bathrooms (subject to bathroom wiring regualtions).
- Nice and quiet - sound pressure only 35dB(A) at 3M.
Easy Installation - A quick, core drilled hole enables immediate fixing of the fan. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces.
