Vent Axia Silhouette 150 Extractor Fans

Vent Axia Silhouette 150 Extractor Fans

The ultra slim Silhouette 150 range of extractor fans from Vent Axia has been designed to meet the rigorous demands of modern living.  With a profile of only 19mm they are guaranteed to provide an unobtrusive installation in any kitchen or utility room.

The careful design ensures optimised sound to performance output due to the 'white sound' spectrum which dramatically understates the dB(A) sound levels.

Mounted under the grille are the electronics, allowing a choice of an adjustable overrun timer, adjustable from 5 to 30 minutes or a  humidistat for detecting a change in the internal humidity.

The Silhouette 150 range of fans are supplied with an electric backdraught shutter and a neon running light.  

The fans can be ceiling or panel mounted and  connected to an appropriate duct run to the outside of the property.

Features and Benefits

        
  • Stylish ultra low profile of only 19mm
  • Downstream airflow guide vanes for improved pressure development
  • Electric backdraught shutters
  • Ball bearing motors allowing vertical or horizontal installation
  • Can be installed at any angle
  • Neon running light
  • IP44 rated
  • DEMKO approved
  • Available with integral timer and humidity controls
  • Suitable for wall or panel mounting*

*Please note that if the fan is ceiling mounted 3m maximum of ducting should be used with a condensation trap

Product Selector

Model

Timer

30 minutes

Humidistat

60-90percent RH

cubic metres 

per hour

litres

per secong

Watts

dB(A)

at 3 metres

Silhouette 150X     241 67 20 43
Silhouette 150XT Yes   241 67 20 43
Silhouette 150XH Yes Yes 241 67 20 43

 

  • Set Ascending Direction
  • Page 1 of 1
  • Set Ascending Direction
  • Page 1 of 1