Vent Axia Lo Carbon Silhouette 150 Extractor Fans

Vent Axia Lo Carbon Silhouette 150 Extractor Fans

The Lo Carbon Silhouette 150 range of Extractor Fans from Vent Axia have been designed with a close eye on the demands of modern living.  Vent Axia have ensured that this range of fans will enhance any decor or environment as the ultra slim profile of only 19mm will blend into the surface onto which it is installed providing an unobtrusive and effective ventilation solution.  

The fans are IX44 rated, are supplied with backdraught shutter and are suitable for either wall or panel mounting

The electronics, incorporating a humidistat to detect internal humidity or an adjustable timer which is adjustable from 5 to 30 minutes, are located in the centre of the fan under the slim profile grille.

Features and Benefits

 

         
  • Downstream airflow guide vanes provide improved pressure development
  • The ball bearing motor allows vertical or horizontal installation
  • Low power consumption
  • Backdraught shutter
  • Ultra low profile grille of only 19mm
  • Can be installed at any angle
  • Integral PIR, Humidity and Timer options are available
  • Suitable for wall and/or panel mounting
  • Wall kit design ensures compliance with Building Regulation Document F requirements.

Product Selector Guide

Type cu. mts/hr lts/sec Watts dB(A) at 3 mts
UTILITY ROOM SETTING
Lo Carbon Silhouette 150B 165 46 3.5 35
Lo Carbon Silhouette 150T 165 46 3.5 35
Lo Carbon Silhouette 150H 165 46 3.5 35
KITCHEN SETTING
Lo Carbon Silhouette 150B 241 67 7.5 43
Lo Carbon Silhouette 150T 241 67 7.5 43
Lo Carbon Silhouette 150H 241 67 7.5 43

 

  • Set Ascending Direction
  • Page 1 of 1
  • Set Ascending Direction
  • Page 1 of 1