Xpelair WX Flush Commercial Wall Axial Fans

Xpelair WX Commercial Wall Axial Fans

 

All models can be installed in solid or cavity walls.

The WX6 and WX12 fans are designed to be built-in to walls not less than 230mm thick and the WX9 model can be flush mounted into walls not less than 180mm thick.

The WX range are ideal for use in any environment that requires effective but unobtrusive ventilation.

Maximum performance ranges from 68 to 476 litres per second. 

All of the models feature automatic back draught shutters which open and close as the fan is switched on and off. 

The Xpelair WX6 is an extract only model operated by an on off switch which should be purchased separately whilst the Xpelair WX9 and Xpelair WX12 models are operated by an on/off switch or an appropriate controller which allows air intake or extraction. 

Product Selector  WX6  WX9 WX12
Model Number 90822AW 89996AW 90011AW
Remote Switch Supplied Separately y y y
Integral adjustable run-on timer (2-20mins)   y  
Extract only y    
Select intake, extract or controller operation   y y
Speeds 1 2* 2*
Extract performance (FID, cubic metres per hour) high/low 246 783/663 1715/1162
Extract performance (FID, cubic litres per second) high/low 68 248/184 476/179
Intake performance (FID, cubic metres per hour) high/low   477/437 969/815
Intake performance (FID, cubic litres per second) high/low   133/121 269/226
Sound pressure level (dB(A) at 3m) high/low 39 50/47 54/48
Electrical powee rating (W) 34 41 85
Hole diameter (w x h)mm 245x268 345x375 434x434
Maximum wall thickness (mm) 292 508 522
Weight (kgs) 2.9 4.7 8.3
Warranty (years) 2 2 2

*The low speed only applies if the fan is used with an FR22/30 controller. If the controller is not used fan is only single speed (high).

  • Set Ascending Direction
  • Page 1 of 1
  • Set Ascending Direction
  • Page 1 of 1