Vent Axia Lo Carbon Sentinel Kinetic Horizontal Heat Recovery Units

Vent Axia Lo Carbon Sentinel Kinetic Horizontal Heat Recovery Units
Fastlec

Vent Axia Lo-Carbon Sentinel Kinetic Horizontal Heat Recovery Units The Sentinel Kinetic Horizontal Range A whole house heat recovery system with up to 81% heat exchange efficiency. An easily

£1,413.51 £1,177.92 ex VAT

Vent Axia Lo-Carbon Sentinel Kinetic Horizontal Heat Recovery Units

The Sentinel Kinetic Horizontal Range

A whole house heat recovery system with up to 81% heat exchange efficiency. An easily accessible heat recovery cube protected by two removable EU3 filters. Incorporating two Lo-Carbon Energy Saving EC/DC motors ensures long life (typically over double the life of AC motors) and lowest possible energy use.

The Lo-Carbon Sentinel Kinetic Horizontal meets the latest requirements of the Building Regulations ADF for whole house system ventilation: System 4 - Continuous mechanical supply and extract with heat recovery. The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range.

Integral Humidity Sensor

The integral humidity sensor ('H' models) increases speed in proportion to relative humidity levels, saving energy and reducing noise.

Features

  • Manufactured in the UK
  • Building Regulation ADF compliant
  • Recognised in SAP PCDB
  • Energy Savings Trust best practice compliant
  • Up to 86% heat recovery whilst controlling condensation
  • Programmable Summer bypass
  • Digital controller for simple and accurate commissioning
  • External condensate connection
  • Plug and play controls; Humidistat, Ventwise, Wireless remote
  • LS inputs (Light Switch)
  • Self-diagnosis for simplified fault finding
  • Adjustable delay on/delay off timer

Operation

The supply and extract ventilation unit shall be as Sentinel Kinetic Z as manufactured by Vent-Axia and shall be sized as indicated on the drawings and shall be in accordance with the particular specification; 200Z – 200mm deep, 300Z – 300mm deep. The Sentinel Kinetic Z shall automatically vary the ventilation rate via EC/ DC motors, as it receives signals from one of the optional interconnected sensors. When a signal is received, the fans shall either vary their speed proportionally or on a trickle and boost principle. The unit shall have the facility to commission the supply and extract fans individually via the wired remote control unit. The fans themselves shall have independent, infinitely variable speed control.

Unit Specification (200Z/ZM, 300ZH)

The unit shall be manufactured with a galvanized steel outer case construction and shall have a high-efficiency aluminium heat exchanger.

Unit Specification (200ZP)

The unit shall be manufactured with high-density EPP case and shall have a high-efficiency polymer heat exchanger. The unit shall have supply and extract filters, automatic summer bypass, integral minimum and maximum infinitely variable speed controls with failure indication via the wired remote controller. The unit shall have low energy, high-efficiency EC/DC fan/motor assemblies with sealed for life bearings. The impellers shall be a high efficiency backwards curved centrifugal type. The unit shall have a heat exchanger cell with a thermal efficiency of up to 81% when tested to EN 308. This shall be protected by G3 grade synthetic filters on supply and extract. Complete with a condensate drip tray and drain connection. The unit shall be constructed with a removable access panel allowing full maintenance access from below. The removable panel shall provide access to the following:

  • Supply or extract fan
  • Supply and extract filter
  • Heat exchanger
  • Access to the electrical connections

Access shall be provided for wiring termination and setup/commissioning.

Standard Controls

  • All Sentinel Kinetic Z units shall incorporate the following functions integrally mounted, pre-wired and factory fitted by the manufacturer:
  • Infinitely variable fan speed control on supply and extract
  • Min/max ventilation control/set point 9 Heating interlocks
  • 0-10V proportional speed adjustment
  • Volt free contacts
  • 24V sensor supply
  • On/off or trickle boost function from the remote switch, e.g. PIR occupancy detector
  • The unit shall be controlled by the ‘Sentinel’ control devices (enablers and sensors) as detailed in the schedule or on the drawings
  • Fully automatic summer bypass
  • Switched Live input with adjustable ‘delay-on’ feature
  • Fan failure or component failure indicated via individual fault code display
  • Running time counter
  • Control panel PIN number lock
  • Automatic frost protection effective to -20°C
  • The unit shall incorporate (‘H’ models) an integral humidity sensor with the following features:
  1. Ambient Response: Raises the humidity trigger point as dwelling temperature reduces
  2. Rapid Response: Monitors the rate of change in humidity and triggers increased airflow even if the humidity trigger threshold is not reached
  3. Proportional Response: Incrementally increases the fan speed to reduce noise and reduce energy consumption

The unit shall be controlled by the ‘Sentinel’ control devices (enablers and sensors) as detailed in the schedule or on the drawings.

Write Your Own Review
Leave a review about this product
Quality
Value
Price
Rating

UK Delivery:

Orders over £75 - FREE DELIVERY*

Orders under £75 - Delivery £4.95 including VAT

*A very small number of large heavy items may attract an additional pallet charge to certain areas. This charge is calculated based on the overall order value and the delivery postcode area. For example, large oil-filled heaters such as the 'Rointe Radiator Range' cannot be safely transported via standard courier services. Depending on your area, there will usually be a carriage paid order value threshold where FREE delivery can still be attained.

Overseas Customers:

Please feel free to contact us for a price if you would like delivery outside of the UK.

Same Day Despatch On In-Stock Items:

We despatch in-stock items on the same working day when they are ordered before 2PM GMT. You can always contact us after this time to see if it is still possible - we are keen to help where we can. If you need a timed delivery service (Before Noon, 10am, 9am and Saturdays etc) - then please contact us directly for a price.

"Fastlec- They really mean fast, press the enter key on your computer and the doorbell rings.

I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products."

If You Have A Deadline:

Out of stock items will show a 'usual' delivery time on the product page, we will notify you if they are likely to take any longer than this. If you have a deadline then please feel free to contact us by email, phone or fax - we can usually meet it!

Fast and Secure:

Most in-stock items are despatched via traceable and insured carriers on a next-day service.

Domestic Addresses: Our carriers deliver between 7.30am and 6.00pm. If you are not in when the carrier arrives, they will leave a card with instructions on how to arrange re-delivery or collection from your local depot.

Business Addresses: Our carrier will attempt delivery on a working day during normal business hours. If there is no-one to sign for the delivery, a card will be left and the parcel taken to the local depot for collection within one week.

Received Damaged:

Any items being returned as damaged in transit, requiring replacement or refund, should be notified to us, either verbally or in writing, within 24 hours of delivery and must be accompanied by clear photographs showing both the packaging - particularly any damage to the packaging - and also the damaged item(s). The correct paperwork can then be sent and these photographs will ensure that replacements or refunds can then be processed with a minimum of delay.

Storage Heater Deliveries:

Even when purchasing a single heater, it will be delivered on a pallet in an attempt to ensure no damage is caused during transit due to the weight of the unit and also the weight of the bricks to be fitted into the unit on installation. Multiple heaters may even mean multiple pallets. The nature and weight of these items mean a truck fitted with a tail lift is usually required and deliveries can, on occasion, be held up waiting for the availability of specialist transport although this is unusual. 

Today's couriers, due to stringent Health and Safety restrictions, who are employed to deliver your storage heater, are contracted to deliver to the external front of your property only and are not contracted to maneuver these heavy items into your house or to their final locations. The item will be delivered to the door of the outer building if access allows (low-level pump trucks are used to move the pallet, therefore, any steps on the way will make this difficult and will probably mean delivery to the bottom of the steps only).
It is your responsibility to ensure that you have adequate manpower (2 people recommended) to transport your new heater(s) and bricks from the delivery point to its final location without injury or damage to yourself, your new heater, or your property.

These considerations have been carefully designed to implement safe shipping and handling practices that will ensure safe and intact delivery of your heater and safe working practices for the delivery personnel.

If You Have An Item To Return

Please Follow the Instructions Below Depending On Your Circumstances:

1. No Longer Required/Ordered Incorrectly

REQUEST RMA RETURNS AUTHORISATION HERE FOR ITEMS NOT REQUIRED-- Please include your order number/invoice number, full name, and details of the item

Unwanted goods can be returned for a refund. As long as the items are as new, unused, in the original packaging (unmarked and undamaged), and fully ready for re-sale we will happily take them back for a refund (please allow 7-10 working days for refunds). Buyer pays for return carriage. Goods must be returned within 14 days from the date of invoice. Specially altered items (such as cut lengths of cable for example) are non-returnable.

Business to Business (B2B) returns are subject to a 25% handling charge.

We have also negotiated a low price for returns via DPD which you can book here.

2. Received Damaged

REQUEST RMA RETURNS AUTHORISATION HERE FOR ITEMS DAMAGED-- Please include your order number/invoice number, full name, and details of the item and then damage.

Any items being returned as damaged in transit, requiring replacement or refund, should be notified, either verbally or in writing, within 24 hours of delivery and must be accompanied by clear photographs showing both the packaging - particularly any damage to the packaging - and also the damaged item(s). The correct paperwork can then be sent and these photographs will ensure that replacements or refunds can then be processed with a minimum of delay.

a) Click here for a pre-paid postage label* for you to return the unit to us and we will dispatch a replacement upon receipt (please mark the outside of the parcel with "Urgent Replacement Required" so that it can be quickly identified) - *If the parcel is larger than 61x46x46cm or heavier than 20Kg, then please contact us to arrange collection

OR

b) You can purchase an Advance Replacement unit, which we send to you, this allows you to have the units exchanged at your own convenience. Click here for a pre-paid postage label* so that you can then return the damaged unit to us for a refund (against the advance replacement). (The Advance Replacement can simply be purchased online as if you were buying a new unit, then REQUEST AN RMA when ready, to send the faulty unit back)

3. Faulty Unit (within 6 months)** 

REQUEST RMA RETURNS AUTHORISATION HERE FOR FAULTY ITEMS-- Please include your order number/invoice number, full name, full details of the item, details of the fault and whether you would prefer a refund or a replacement.

We understand that when this situation arises it can be a great inconvenience, so after checking with the manufacturer's technical helpline (Most suspected faults can be sorted out over the phone as they result from wiring or setup issues - which is a good thing as it saves you sending the unit back in the first place) we offer the following two options:

a) We can supply a pre-paid postage label* for you to return the unit to us and we will dispatch a replacement upon receipt (please mark the outside of the parcel with "Urgent Replacement Required" so that it can be quickly identified) - *If the parcel is larger than 61x46x46cm or heavier than 20Kg, then please contact us to arrange collection

OR

b) You can purchase an Advance Replacement unit, which we send to you, this allows you to have the units exchanged at your own convenience. We will provide you with a pre-paid postage label* so that you can then return the faulty unit to us for a refund (against the advance replacement). (The Advance Replacement can simply be purchased online as if you were buying a new unit, then REQUEST AN RMA to authorise the return of the faulty unit)

Suspected faulty items are 'tested' prior to refund or replacement.

When Returning ANY Item, Please Include:

  1. A copy of your invoice or order confirmation
  2. Your contact details including address
  3. A clear description of the fault (plus any manufacturer's comments)
  4. Your preference of replacement or refund where applicable (please allow 7-10 working days for refunds)
  5. An RMA reference number (email [email protected] to obtain this)

 

**If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return Here

REQUEST RMA RETURNS AUTHORISATION HERE-- Please include your order number/invoice number, full name, full details of the item, details of the fault and whether you would prefer a refund or a replacement.

If the faulty unit is returned within 30 days of receipt, then a refund or replacement can be issued. Faulty items returned after 30 days of receipt cannot be refunded, however, we can provide a replacement.

In some cases, we may offer a partial refund to cover the remaining part of any existing warranty rather than a replacement.

If the faulty unit is returned within 30 days of receipt, then a refund or replacement can be issued. Faulty items returned after 30 days of receipt cannot be refunded, however, we can provide a replacement.

If Fastlec no longer stocks the item, we will refund you the remaining of your warranty

Overseas returns - We are unable to cover the return or re-shipping charges on overseas purchases.

Vent Axia Lo-Carbon Sentinel Kinetic Horizontal Heat Recovery Units

The Sentinel Kinetic Horizontal Range

A whole house heat recovery system with up to 81% heat exchange efficiency. An easily accessible heat recovery cube protected by two removable EU3 filters. Incorporating two Lo-Carbon Energy Saving EC/DC motors ensures long life (typically over double the life of AC motors) and lowest possible energy use.

The Lo-Carbon Sentinel Kinetic Horizontal meets the latest requirements of the Building Regulations ADF for whole house system ventilation: System 4 - Continuous mechanical supply and extract with heat recovery. The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range.

Integral Humidity Sensor

The integral humidity sensor ('H' models) increases speed in proportion to relative humidity levels, saving energy and reducing noise.

Features

  • Manufactured in the UK
  • Building Regulation ADF compliant
  • Recognised in SAP PCDB
  • Energy Savings Trust best practice compliant
  • Up to 86% heat recovery whilst controlling condensation
  • Programmable Summer bypass
  • Digital controller for simple and accurate commissioning
  • External condensate connection
  • Plug and play controls; Humidistat, Ventwise, Wireless remote
  • LS inputs (Light Switch)
  • Self-diagnosis for simplified fault finding
  • Adjustable delay on/delay off timer

Operation

The supply and extract ventilation unit shall be as Sentinel Kinetic Z as manufactured by Vent-Axia and shall be sized as indicated on the drawings and shall be in accordance with the particular specification; 200Z – 200mm deep, 300Z – 300mm deep. The Sentinel Kinetic Z shall automatically vary the ventilation rate via EC/ DC motors, as it receives signals from one of the optional interconnected sensors. When a signal is received, the fans shall either vary their speed proportionally or on a trickle and boost principle. The unit shall have the facility to commission the supply and extract fans individually via the wired remote control unit. The fans themselves shall have independent, infinitely variable speed control.

Unit Specification (200Z/ZM, 300ZH)

The unit shall be manufactured with a galvanized steel outer case construction and shall have a high-efficiency aluminium heat exchanger.

Unit Specification (200ZP)

The unit shall be manufactured with high-density EPP case and shall have a high-efficiency polymer heat exchanger. The unit shall have supply and extract filters, automatic summer bypass, integral minimum and maximum infinitely variable speed controls with failure indication via the wired remote controller. The unit shall have low energy, high-efficiency EC/DC fan/motor assemblies with sealed for life bearings. The impellers shall be a high efficiency backwards curved centrifugal type. The unit shall have a heat exchanger cell with a thermal efficiency of up to 81% when tested to EN 308. This shall be protected by G3 grade synthetic filters on supply and extract. Complete with a condensate drip tray and drain connection. The unit shall be constructed with a removable access panel allowing full maintenance access from below. The removable panel shall provide access to the following:

  • Supply or extract fan
  • Supply and extract filter
  • Heat exchanger
  • Access to the electrical connections

Access shall be provided for wiring termination and setup/commissioning.

Standard Controls

  • All Sentinel Kinetic Z units shall incorporate the following functions integrally mounted, pre-wired and factory fitted by the manufacturer:
  • Infinitely variable fan speed control on supply and extract
  • Min/max ventilation control/set point 9 Heating interlocks
  • 0-10V proportional speed adjustment
  • Volt free contacts
  • 24V sensor supply
  • On/off or trickle boost function from the remote switch, e.g. PIR occupancy detector
  • The unit shall be controlled by the ‘Sentinel’ control devices (enablers and sensors) as detailed in the schedule or on the drawings
  • Fully automatic summer bypass
  • Switched Live input with adjustable ‘delay-on’ feature
  • Fan failure or component failure indicated via individual fault code display
  • Running time counter
  • Control panel PIN number lock
  • Automatic frost protection effective to -20°C
  • The unit shall incorporate (‘H’ models) an integral humidity sensor with the following features:
  1. Ambient Response: Raises the humidity trigger point as dwelling temperature reduces
  2. Rapid Response: Monitors the rate of change in humidity and triggers increased airflow even if the humidity trigger threshold is not reached
  3. Proportional Response: Incrementally increases the fan speed to reduce noise and reduce energy consumption

The unit shall be controlled by the ‘Sentinel’ control devices (enablers and sensors) as detailed in the schedule or on the drawings.

Write Your Own Review
Leave a review about this product
Quality
Value
Price
Rating

UK Delivery:

Orders over £75 - FREE DELIVERY*

Orders under £75 - Delivery £4.95 including VAT

*A very small number of large heavy items may attract an additional pallet charge to certain areas. This charge is calculated based on the overall order value and the delivery postcode area. For example, large oil-filled heaters such as the 'Rointe Radiator Range' cannot be safely transported via standard courier services. Depending on your area, there will usually be a carriage paid order value threshold where FREE delivery can still be attained.

Overseas Customers:

Please feel free to contact us for a price if you would like delivery outside of the UK.

Same Day Despatch On In-Stock Items:

We despatch in-stock items on the same working day when they are ordered before 2PM GMT. You can always contact us after this time to see if it is still possible - we are keen to help where we can. If you need a timed delivery service (Before Noon, 10am, 9am and Saturdays etc) - then please contact us directly for a price.

"Fastlec- They really mean fast, press the enter key on your computer and the doorbell rings.

I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products."

If You Have A Deadline:

Out of stock items will show a 'usual' delivery time on the product page, we will notify you if they are likely to take any longer than this. If you have a deadline then please feel free to contact us by email, phone or fax - we can usually meet it!

Fast and Secure:

Most in-stock items are despatched via traceable and insured carriers on a next-day service.

Domestic Addresses: Our carriers deliver between 7.30am and 6.00pm. If you are not in when the carrier arrives, they will leave a card with instructions on how to arrange re-delivery or collection from your local depot.

Business Addresses: Our carrier will attempt delivery on a working day during normal business hours. If there is no-one to sign for the delivery, a card will be left and the parcel taken to the local depot for collection within one week.

Received Damaged:

Any items being returned as damaged in transit, requiring replacement or refund, should be notified to us, either verbally or in writing, within 24 hours of delivery and must be accompanied by clear photographs showing both the packaging - particularly any damage to the packaging - and also the damaged item(s). The correct paperwork can then be sent and these photographs will ensure that replacements or refunds can then be processed with a minimum of delay.

Storage Heater Deliveries:

Even when purchasing a single heater, it will be delivered on a pallet in an attempt to ensure no damage is caused during transit due to the weight of the unit and also the weight of the bricks to be fitted into the unit on installation. Multiple heaters may even mean multiple pallets. The nature and weight of these items mean a truck fitted with a tail lift is usually required and deliveries can, on occasion, be held up waiting for the availability of specialist transport although this is unusual. 

Today's couriers, due to stringent Health and Safety restrictions, who are employed to deliver your storage heater, are contracted to deliver to the external front of your property only and are not contracted to maneuver these heavy items into your house or to their final locations. The item will be delivered to the door of the outer building if access allows (low-level pump trucks are used to move the pallet, therefore, any steps on the way will make this difficult and will probably mean delivery to the bottom of the steps only).
It is your responsibility to ensure that you have adequate manpower (2 people recommended) to transport your new heater(s) and bricks from the delivery point to its final location without injury or damage to yourself, your new heater, or your property.

These considerations have been carefully designed to implement safe shipping and handling practices that will ensure safe and intact delivery of your heater and safe working practices for the delivery personnel.

If You Have An Item To Return

Please Follow the Instructions Below Depending On Your Circumstances:

1. No Longer Required/Ordered Incorrectly

REQUEST RMA RETURNS AUTHORISATION HERE FOR ITEMS NOT REQUIRED-- Please include your order number/invoice number, full name, and details of the item

Unwanted goods can be returned for a refund. As long as the items are as new, unused, in the original packaging (unmarked and undamaged), and fully ready for re-sale we will happily take them back for a refund (please allow 7-10 working days for refunds). Buyer pays for return carriage. Goods must be returned within 14 days from the date of invoice. Specially altered items (such as cut lengths of cable for example) are non-returnable.

Business to Business (B2B) returns are subject to a 25% handling charge.

We have also negotiated a low price for returns via DPD which you can book here.

2. Received Damaged

REQUEST RMA RETURNS AUTHORISATION HERE FOR ITEMS DAMAGED-- Please include your order number/invoice number, full name, and details of the item and then damage.

Any items being returned as damaged in transit, requiring replacement or refund, should be notified, either verbally or in writing, within 24 hours of delivery and must be accompanied by clear photographs showing both the packaging - particularly any damage to the packaging - and also the damaged item(s). The correct paperwork can then be sent and these photographs will ensure that replacements or refunds can then be processed with a minimum of delay.

a) Click here for a pre-paid postage label* for you to return the unit to us and we will dispatch a replacement upon receipt (please mark the outside of the parcel with "Urgent Replacement Required" so that it can be quickly identified) - *If the parcel is larger than 61x46x46cm or heavier than 20Kg, then please contact us to arrange collection

OR

b) You can purchase an Advance Replacement unit, which we send to you, this allows you to have the units exchanged at your own convenience. Click here for a pre-paid postage label* so that you can then return the damaged unit to us for a refund (against the advance replacement). (The Advance Replacement can simply be purchased online as if you were buying a new unit, then REQUEST AN RMA when ready, to send the faulty unit back)

3. Faulty Unit (within 6 months)** 

REQUEST RMA RETURNS AUTHORISATION HERE FOR FAULTY ITEMS-- Please include your order number/invoice number, full name, full details of the item, details of the fault and whether you would prefer a refund or a replacement.

We understand that when this situation arises it can be a great inconvenience, so after checking with the manufacturer's technical helpline (Most suspected faults can be sorted out over the phone as they result from wiring or setup issues - which is a good thing as it saves you sending the unit back in the first place) we offer the following two options:

a) We can supply a pre-paid postage label* for you to return the unit to us and we will dispatch a replacement upon receipt (please mark the outside of the parcel with "Urgent Replacement Required" so that it can be quickly identified) - *If the parcel is larger than 61x46x46cm or heavier than 20Kg, then please contact us to arrange collection

OR

b) You can purchase an Advance Replacement unit, which we send to you, this allows you to have the units exchanged at your own convenience. We will provide you with a pre-paid postage label* so that you can then return the faulty unit to us for a refund (against the advance replacement). (The Advance Replacement can simply be purchased online as if you were buying a new unit, then REQUEST AN RMA to authorise the return of the faulty unit)

Suspected faulty items are 'tested' prior to refund or replacement.

When Returning ANY Item, Please Include:

  1. A copy of your invoice or order confirmation
  2. Your contact details including address
  3. A clear description of the fault (plus any manufacturer's comments)
  4. Your preference of replacement or refund where applicable (please allow 7-10 working days for refunds)
  5. An RMA reference number (email [email protected] to obtain this)

 

**If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return Here

REQUEST RMA RETURNS AUTHORISATION HERE-- Please include your order number/invoice number, full name, full details of the item, details of the fault and whether you would prefer a refund or a replacement.

If the faulty unit is returned within 30 days of receipt, then a refund or replacement can be issued. Faulty items returned after 30 days of receipt cannot be refunded, however, we can provide a replacement.

In some cases, we may offer a partial refund to cover the remaining part of any existing warranty rather than a replacement.

If the faulty unit is returned within 30 days of receipt, then a refund or replacement can be issued. Faulty items returned after 30 days of receipt cannot be refunded, however, we can provide a replacement.

If Fastlec no longer stocks the item, we will refund you the remaining of your warranty

Overseas returns - We are unable to cover the return or re-shipping charges on overseas purchases.

Shop with confidence at Fastlec


Here at Fastlec, we have been selling electrical products online since 2003, so as you can imagine by now we're really getting the hang of it. To prove it, you'll notice that our independent reviews are the best in the industry. We're always trying to think of ways we can improve the service to you.

Does that mean we never get it wrong? Of course not, but in those tiny number of cases, you'll find we pull all of the stops out to put things right for you.

  • Proud member of
  • Fastlec-Fegime

We Provide:


  • Low Price
  • Fast, Free Delivery
  • Privacy Valued
  • Money Back Guarantee
  • Secure Shopping Guaranteed
  • Providing Quality & Value Since 2003