The Airflow iCON30 packs a higher punch than the iCON15
model which makes it perfect for bathrooms. Even with this extra
power, the iCON30 remains extremely quiet and creates no more noise
than its smaller counterpart.
This fan is also extremely effective in utilty
rooms, shower rooms, en-suites and toilets.
If the standard white cover that comes with the iCON doesn't
suit your decor, then you can choose from silver, anthracite or
sandstone covers as optional extras - they are very easy to fit or
even retrofit.
Pick an (optional) control module to change the
behaviour of your fan:
Various modules are available in order to allow you to control
humidity, delay on, delay off, continuous operation, PIR sensing
etc.
Auto Iris Shutter: Everyone's favourite
feature of this fan is the unique way the stylish shutter gradually
opens after switching on
Humidity (HTM) - Monitors the humidity in your
bathroom and switches the fan on and off as required to control it.
Also incorporates an overrun timer which allows the fan to run on
for a while after the room light is switched off. The module also
comes with a pullcord to allow local manual switching of the fan
for the duration of the timer setting. Both the humidity level and
the timer can be easily adjusted to suit your needs.
Timer (TM) - An overrun timer which allows the fan
to run on for a while after the room light is switched off.
Pullcord (PCM) - Allows local manual switching of
the fan.
PIR/Timer (PRTM) - Switches the fan on when
someone walks into the room. When they leave the room, the fan runs
on for the duration of the timer setting. The module also comes
with a pullcord to allow local manual switching of the fan for the
duration of the timer setting.
PIR/Humidity/Timer (PRHTM) - Same as the PRTM
module but with additional humidity control (As you could easily
leave the room when its full of steam).
Continuous Ventilation 2 Speed (CV2) -
Allows the fan to run continuously at a low speed with the option
to boost to high speed when the room is in use.
Delay Start (DTM) - Delays fan start by
2 minutes and includes an over-run timer
| |
- Ductable up to 4M.
- Wall/ceiling/panel mounting.
- Performance 32 litres per second which is 118 metres cubed per hour.
- Fan size 225x43mm.
- Duct Size 100mm (Requires 160mm hole to a depth of approx 80mm to flush mount)
- Supply 230V.
- IPX4 Splashproof.
- Sound pressure 34.5dB(A) at 3M.
|
Easy Installation - A quick, core drilled hole
enables immediate fixing of the fan. The twist on/off cover
requires only a single side entry fixing screw. Cantilever fixing
lugs enable recessed installation on uneven surfaces.
Supplied with a narrow contour skirt for optional surface
mounting.
Flush Fitting - Hole Size - 160mm to a depth of
approx 80mm to accept motor body then 110mm for ducting
Surface Fitting - Hole Size - 110mm
"Purchased the Icon 30 with
additional timer module and it arrived the next day and was fitted
easily. It has made a massive difference in my bathroom: no more
misted mirrors, wet windows or downdraught. A great product at a
great price delivered via great service."
- Nick Hooper
