JCC ToughLED 5FT Single High Output Non Corrosive LED Waterproof Fittings
JCC ToughLED 5FT Twin High Output Non-Corrosive LED Waterproof Fittings Outperforms linear fluorescent light output Up to
JCC ToughLED 5FT Twin High Output Non-Corrosive LED Waterproof Fittings
- Outperforms linear fluorescent light output
- Up to 30% energy saving against linear fluorescent
- Instant startup, flicker free
- Beam Angle 120°
- Quick and easy point for point installation
- Polycarbonate diffuser and body, suitable for food preparation areas
- Stainless steel anti-tamper clips
- Product life not affected by on/off switching
- 5 year extended warranty (requires online registration at JCC website)
- IP65 Protection
- Suspension Kits available for single (JC71525) or twin fittings (JC71526)
Types of available dimming options include 1-10V, DALI, DSI, and Sensor Dimming.
1 -10V Dimming often works very well for dedicated LED fittings when coupled with a 1-10V dimmable driver. Dimming is often smoother and lower than mains dimming options. It requires a separate ‘control’ cable to be run from the controller to the fittings driver.
DALI (Digital Addressable Lighting Interface) has been more commonly found in commercial environments and is a digital system. It is very flexible in its deployment and use. As with the 0-10V system, it requires a control cable, but with DALI this cable can be run between many fittings. DALI is generally used with professionally designed lighting control systems.
Digital Serial Interface (DSI) is a protocol for the controlling of lighting in buildings (initially electrical ballasts). Its simple nature makes it straightforward to understand, implement, and diagnose, while its low voltage means it typically runs along relatively thin cables. Because each device has its own wire to the controller (rather than being part of a network) it has no need of an address to be set, so can be replaced simply by unplugging the faulty one and plugging in the new.
Sensor Dimming fittings use microwave detector technology to drop the light level from full to minimum, automatically, when movement is detected
For additional information on which type of dimming solution you require please contact JCC direct on 01243 838986
|Stock Number||Length||Dimmable||Microwave Sensor||Single / Twin||Lumens||Watts||Emergency||Dimmensions (MM)|
|JC715011SD||5FT||Sensor / Step Dimming||Yes||Twin||9000||98W||No||1563x155x96|