Please click here for a FREE design and quotation on this product.
Everything that you need comes in one box. The Vysa-Cable™ Classic heating cable, Vysal-Therm™ 3000 digital thermostat, flexible conduit for floor sensor, Vysa-Bond™ PVA floor primer, roller to apply the floor primer and the Vysa-Bond™ SAT strong adhesive tape to affix the heating cable to the primed floor.
The ultra thin Vysa-Cable™ Classic heating cables can easily be fitted directly on top of your existing tiled floor without needing remove the existing tiles.
Vysa-Cable™ Classic heating cables rated 15W/m are ideal for refurbishment projects where they can be installed onto an existing floor structure with either a concrete or timber sub-floor.
Vysa-Cable™ Classic can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level. Consequently, there should be no requirement to reduce door heights, raise skirting boards etc.
Vysa-Cable™ Classic heating cables rated 15W/m are also ideal for installation embedded in concrete or a floor screed in new-build project applications too. The PFTE outer jacket is tough enough to withstand normal process conditions of this application.
Vysa-Cable™ Classic cables rated 15W/m can be used on timber sub-floors but BS EN 60 335 / IEC 335 recommends that the power rating must be confined to 100W/m2 unless you install Vysa-Pron™ thermal insulation on top of the timber sub-floor. You just have to space the cables appropriately to achieve 100W/m2 and the installation instructions tell you how to do it.
Naturally, Vysa-Cable™ Classic is a twin conductor design with a single 3 metre long ‘cold tail’ connections lead (only one connection cable to the thermostat).
Note - Do not exceed 120W/m2 for wooden subfloors
