Vent Axia Solo Plus TM (Timer/PIR) Extractor Fan
The Solo Plus TM (Timer/PIR) Extractor Fan is finished in white and can be flush or surface mounted with a 2-position 100mm circular spigot for rear entry or for connecting to a vertical ducting system.
It is a two speed extractor fan with a constant trickle option.
The Solo Plus TM is controlled by an integral PIR detector.
Installations using 100mm ducting in straight runs up to 50 metres are possible due to the powerful centrifugal forward curved impeller and the unit will achieve 15 litres per second as required by Document F of the current Building Regulations.
All models can be wall panel or ceiling mounted and can be connected to either circular, rectangular of Vent Axia's System 25 Flat Ducting which has been specially designed for concealed applications that can benefit from its ultra slim 25mm depth.
Cable entry is achieved through a rear entry grommet on the top right hand side of the unit. Enclosure of the electrical components is manufactured from flame retardant grade material.
The supply voltage is 220-240V/1/50Hz
The motor fitted into the Solo Plus is a highly efficient ball bearing capacitor run motor. Capacitor run motors offer the benefit of being over 50 per cent more efficient than conventional shaded pole motors within the same class. The fully enclosed motor is fixed onto a 3 position anti-vibration mount which offers higher reliability and lower noise.
||Extract Performance cu M/hr (l/s) - FID
||Sound dB(A) at 3 metres
|Solo Plus T
|A||B ||C ||D ||EØ ||F ||G ||H ||I ||J ||K ||L