Steinel sensIQ Black Multifunction PIR
The SensIQ is a motion detector for walls and ceilings which is fast becoming accepted as one of the most cleverly thought-through motion detectors of its type. It not only looks good but offers a high level of intelligence.
The SensIQ incorporates several unique features including being the first sensor for all requirements and coverage angles from 200 deg to 300 deg.
A remote control makes handling exceptionally easy. Its detection reach can be easily adjusted in three different directions on the unit itself both quickly and accurately saving you the time that used to be required to carry out these adjustments.
The SensIQ has been awarded an internationally coveted IF Design Award for its combination of professional sensor technology and contemporary design.
Less effort - more options
Accessories for the SensIQ models leave no question unanswered.
Soft Start module, Wireless Module or floating module can adapt the SensIQ to your specific requirements and the remote control make operation exceptionally simple.
Basic Settings on the Unit
The twilight setting, the time setting and the reach setting are three important parameters that can be easily adjusted directly in the unit.
For the twilight setting the sensor’s response threshold can be set to values of between 2 lux and 2000 lux. The time you want the connected load to stay ‘ON’ at night can be infinitely varied from five seconds to fifteen minutes. A pulse function is also provided.
The reach can be adjusted in three directions by three separate control dials (100 deg. Respectively) independently from one another.
Simple and well structured - operation and use
The SensIQ benefits from a number of intelligent programmes and modes that can all be selected directly on the unit or using a practical remote control that comes with the sensor. This way, you stay completely in control despite the systems technical complexity. Here is a summary of the main setting options:
Twilight Setting (response threshold) The response threshold can be set to between 2 and 2000 lux. You can save the twilight response threshold using the remote control.
Reach Setting:Three control dials set reach in three directions (100 deg each) to the accuracy of a metre.The time you want the light to stay ‘ON’ for can be infinitely varied between 5 seconds and 15 minutes.
Switch-off Delay:
Pulse Mode: In the pulse mode, output is activated for 2 seconds (e.g. for staircase lighting time switches). Afterwards, the sensor does not react to movement for approx. 8 sec.
Special functions:
Holiday mode
The SensIQ provides a number of special functions. One of them is the holiday mode. This is activated at the relevant button on the IR remote control. The holiday function simulates occupancy to protect your home from intruders while you are away. When the twilight threshold is reached the connected load is switched ‘On and ‘OFF’ at certain programmed times. Normal sensor mode remains active.
Manual override setting
This function can also be selected using the remote control supplied with the sensor. Pressing the relevant button switches the connected load ‘ON’ for four hours. After this period the sensor returns to sensor mode automatically.
Dimensions: (w x h x d) 144 x 113 x 172mm
Output: 2500W max. (resistive load, e.g. filament bulb), 1000W max. (uncorrected, inductive, e.g. fluorescent lamps), Max. 1000W (series corrected), 500W max (parallel corrected), 600W max (electronic ballasts, capacitive e.g. low energy bulbs, max of 8 each
Voltage: 230 - 240 V/ 50 Hz (2.5sq mm max.)
Detection angle: 300 degrees with 180 degrees angle of aperture as well as sneak-by guard for coverage directly below the sensor; capability of masking out individual detection segments
Reach: Adjustable in 3 directions by control dial, (2 - 20m max.)
Temperature stabilised. Sensor system 4 sensors, 6 levels for long distance detection and 5 for sneak by guard. 1360 switching zones
Time setting: 5 sec. - 15 min. pulse mode (approx 2 sec.)
Twilight setting: 2 - 2000 lux
Manual override: selectable (4h)
Enclosure: IP54
Protection: Class II
Ambient temperature: -20 degC - +50 degC
Accessories:
Soft start module MS1, 100W max
Wireless module MF1
Floating module MPF1
IR remote control RC1
Corner wall mount for installing sensor on external corners
First class detection properties, precision adaptability
Twilight response threshold can be set by remote control
Holiday function for warding off intruders, manual override, permanently OFF
Soft start module with basic brightness: lighting with greater aesthetic appeal, longer lamp life
Unbeatable value for money
Top quality for long service life
Award Winning design
Reach can be set easily, quickly and accurately on the unit to within a metre in three separate directions
Fast installation
Large terminal compartment
One sensor for all detection needs
Both wall and ceiling mounting
Corner bracket is available for external corners
Control dial for setting time and twilight response threshold
Optional modules providing installation benefits: wirelessly interconnected or floating.
