Airflow iCON eco 15 Extractor Fan Mains 100mm
The Airflow iCON eco 15 fan offers both stylish appearance and exceptional air extraction and is ideally suited for use in toilets, en-suite bathrooms, small bathrooms or shower rooms.
Switching on and off is almost silent due to the modern shutter design and this actively assists the reduction of external noise ingress and reduces draughts.
This extractor fan discreetly blends into any setting due to its slim profile and iris shutter.
The optional 'snap in' module is quick and easy to wire and fit and the circular cover flange reduces the need for making good when tiling. One wipe and the splashproof cover is clean.
Optional modules are available which allow you to get the best from your fan. Modules are available for Pullcord, Timer, Humidity or Motion Sensing operation. Please remember to select the module you require. Any module will easily fit into any fan. It is that easy.
Airflow iCON eco 15 Control Modules:
Which module should I use?
Humidity (HTM) - Monitors the humidity in your bathroom and switches the fan on and off as required to control it. Also incorporates an overrun timer which allows the fan to run on for a while after the room light is switched off. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting. Both the humidity level and the timer can be easily adjusted to suit your needs.
Timer (TM) - An overrun timer which allows the fan to run on for a while after the room light is switched off.
Pullcord (PCM) - Allows local manual switching of the fan.
PIR/Timer (PRTM) - Switches the fan on when someone walks into the room. When they leave the room, the fan runs on for the duration of the timer setting. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting.
PIR/Humidity/Timer (PRHTM) - Same as the PRTM module but with additional humidity control (As you could easily leave the room when its full of steam).
Continuous Ventilation 2 Speed (TPM15) - Allows the fan to run continuously at a low speed with the option to boost to high speed when the room is in use.
Main Features
- Ductable up to 4M.
- SPF compliant (0.49 w/l/s).
- Meets 2010 Building Regulations.
- Wall/ceiling/panel mounting.
- Performance 18.6 litres per second which is 67 metres cubed per hour.
- Fan size 197x40mm.
- Duct Size 100mm.
- Power (watts) 9.2.
- Supply 230V.
- IPX4 Splashproof.
- Maximum ambient temperature 40 deg. Centigrade
- Sound pressure 35dB(A) at 3M.
Easy Installation - A quick, core drilled hole enables immediate fixing of the fan. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces.
