The Airflow iCON30 packs a higher punch than the iCON15 model which makes it perfect for bathrooms. Even with this extra power, the iCON30 remains extremely quiet and creates no more noise than its smaller counterpart.
This fan is also extremely effective in utilty rooms, shower rooms, en-suites and toilets.
If the standard white cover that comes with the iCON doesn't suit your decor, then you can choose from silver, anthracite or sandstone covers as optional extras - they are very easy to fit or even retrofit.
Pick an (optional) control module to change the behaviour of your fan:
Various modules are available in order to allow you to control humidity, delay on, delay off, continuous operation, PIR sensing etc.
Auto Iris Shutter: Everyone's favourite feature of this fan is the unique way the stylish shutter gradually opens after switching on
Humidity (HTM) - Monitors the humidity in your bathroom and switches the fan on and off as required to control it. Also incorporates an overrun timer which allows the fan to run on for a while after the room light is switched off. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting. Both the humidity level and the timer can be easily adjusted to suit your needs.
Timer (TM) - An overrun timer which allows the fan to run on for a while after the room light is switched off.
Pullcord (PCM) - Allows local manual switching of the fan.
PIR/Timer (PRTM) - Switches the fan on when someone walks into the room. When they leave the room, the fan runs on for the duration of the timer setting. The module also comes with a pullcord to allow local manual switching of the fan for the duration of the timer setting.
PIR/Humidity/Timer (PRHTM) - Same as the PRTM module but with additional humidity control (As you could easily leave the room when its full of steam).
Continuous Ventilation 2 Speed (CV2) - Allows the fan to run continuously at a low speed with the option to boost to high speed when the room is in use.
Delay Start (DTM) - Delays fan start by 2 minutes and includes an over-run timer
- Ductable up to 4M.
- Wall/ceiling/panel mounting.
- Performance 32 litres per second which is 118 metres cubed per hour.
- Fan size 225x43mm.
- Duct Size 100mm (Requires 160mm hole to a depth of approx 80mm to flush mount)
- Supply 230V.
- IPX4 Splashproof.
- Sound pressure 34.5dB(A) at 3M.
Easy Installation - A quick, core drilled hole enables immediate fixing of the fan. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces.
Supplied with a narrow contour skirt for optional surface mounting.
Flush Fitting - Hole Size - 160mm to a depth of approx 80mm to accept motor body then 110mm for ducting
Surface Fitting - Hole Size - 110mm
"Purchased the Icon 30 with additional timer module and it arrived the next day and was fitted easily. It has made a massive difference in my bathroom: no more misted mirrors, wet windows or downdraught. A great product at a great price delivered via great service." - Nick Hooper